Dominumbers Too

This CAD model was designed by Oskar van Deventer, copyright (c), 7 April 2024.

Dominumbers Too is an improved version of Dominumbers. It is a pattern puzzle with magnetic marbles and a magnetic board. The object of the puzzle is to place the domino pieces such that they make numbers: 0123456789. Other challenges are +-*/:|^║=?, white and black. The puzzle is quite confusing to solve, if you don't know what you are doing. When solving systematically, one would first need to map out the magnets embedded in the board and in the seven pieces. With that knowledge, one can easily solve each challenge on paper, and then confirm with the magnetic puzzle.

The puzzle was designed by using Excel. 15 magnets are placed in the board randomly, and it counted the number of black-white (and white-black) spheres for each of the challenges. If all those numbers are equal, then the puzzle can at least be solved with monominoes. If not, then the loop is repeated. Excel found a solution quickly. Surprisingly, that solution did not only allow the ten canonical challenges 0123456789, but over ten additional challenges as well. So the magnet placement on the board is quite "universal". Next, I combined the 15 monominoes into 6 dominoes (two of each of the three types 00, 01, 11) and one triomino (the "V" triomino, 110). After that, I manually confirmed that each of the twenty challenges are solvable.

There are 15 disk magnets in the board and another 15 disk magnets in the square pieces, all 12x3 millimeter (https://www.supermagnete.de/eng/disc-magnets-neodymium/disc-magnet-12mm-3mm_S-12-03-N). The magnets are print-in-place, pausing the printer at the right height to insert the magnets.

Here are some links about this design.
https://www.youtube.com/watch?v=Q7F3eHVQAvs
https://twistypuzzles.com/forum/viewtopic.php?t=39597

Feel free to 3D-print an extra sample to give to a friend, as long as you mention the designer and don't charge money.

If you are planning to sell some samples, then please contact me for a license agreement. The royalty fee is 10% of your selling price.

Please do not upload the design to a commercial service, or redistribute the design in any way other than linking to the YouTube video: https://www.youtube.com/watch?v=Q7F3eHVQAvs

Enjoy!

Oskar
31 August 2024

Contact: 
https://oskarvandeventer.nl/index_contact.php?subject=Print%20It%20Yourself


